International Journal of Advances in 
Engineering & Technology
Creative Commons License
This work is licensed under a Creative Commons Attribution 3.0 Unported License.

ISSN: 2231-1963

ijaet logo
Privacy Policy of IJAET
Go Green Online IJAET
Home Home
Home
Aim & Scope Aim & Scope
Aim & Scope
Editorial Board Editorial Board
Editorial Board
Archives Archives
Archives
Call for Papers Call for Papers
Call for Papers
Instructions for Authors Instructions for Authors
Instructions for Authors
Online Submission Online Submission
Online Submission
Copyright Policy Copyright Policy
Copyright Policy
Indexing & Archiving Indexing & Archiving
Indexing & Archiving
Special Issue Special Issue
Special Issue
Open Access Open Access
Open Access
Peer Review Peer Review
Peer Review
Publication Guidelines Publication Guidelines
Publication Guidelines
Research Database Research Database
Research Database
Impact Factor Impact Factor
Impact Factor
Research Volunteer Research Volunteer
Research Volunteer
Disclaimer Disclaimer
Disclaimer
Reviewer Board Reviewer Board
Reviewer Board
Flyers Flyers
Flyers
IJAET Supporters IJAET Supporters
IJAET Supporters
Downloads Downloads
Downloads
Help & Support Help & Support
Help & Support
Contact Us Contact Us
Contact Us
Web Gallery Web Gallery
Web Gallery

Home

                Aim & Scope         Editorial Board    Call for Paper              Instruction for Authors

Copyright              Articles

                        Contact Us                    Open Access              Indexing & Archiving

Peer Review          Archives

        Help & Support    Downloads              Paper Submission
IJAET Background
Publication Fee Publication Fee
Publication Fee
Call for Papers
IJAET Sitemap

Volume 3 Issue 2

S.No. Article Title & Authors (Volume 3, Issue 2, May - 2012) Page Nos. Status
1. Experimental Study of a Computational Hybrid Method for the Radiated Coupling Modelling between Electronic Circuits and Electric Cable
Elagiri Ramalingam Rajkumar, Blaise Ravelo, Mohamed Bensetti, Yang Liu, Priscilla Fernandez Lopez, Fabrice Duval and Moncef Kadi
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 1-15, May 2012.
1-15 Online
2. Development of Control Circuit for Parabolic Dish Solar Water Heater
Ibrahim Ladan Mohammed and Paul N. Bartholomew
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 16-25, May 2012.
16-25 Online
3. High Speed Reverse Converter for High Dynamic Range Moduli Set
Mohammad Reza Taheri, Abdolreza Pirhoseinlo, Mojtaba Esmaeildoust, Mohammad Esmaeildoust, Keivan Navi
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 26-37, May 2012.
26-37 Online
4. Scrutiny to the Non-Axially Deformations of an Elastic Foundation on a Cylindrical Structure with the Nonlinear Equations
Khashayar Teimoori
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 38-47, May 2012.
38-47 Online
5. A Review on Operational Distance Enhancement of the Ultra High Frequency (UHF) in Military Radio
Nasrul Humaimi Mahmood and Azian Hidayati Aziz
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 48-54, May 2012.
48-54 Online
6. Design of a Dielectric Spectroscopy Sensor for Continuous and Non-Invasive Blood Glucose Monitoring
Gennaro Gelao, Roberto Marani, Vito Carriero and Anna Gina Perri
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 55-64, May 2012.
55-64 Online
7. On Stage Performer Tracking System
Salman Afghani, M. Khalid Riaz, Yasir Raza, Zahid Bashir and Usman Khokhar
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 65-76, May 2012.
65-76 Online
8. Application of the Reduced Bond Graph Approach to Determine the Scattering Parameters of a Matching Network of a Planar Inverted F Antenna
Sameh Khmailia, Hichem Taghouti, Riadh Mehouachi & Abdelkader Mami
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 77-89, May 2012.
77-89 Online
9. The Optimization and Real-time Implementation of speech codec G.729A using CS-ACELP on TMS320C6416T
Noureddine Aloui, Chafik Barnoussi, Mourad Talbi, Adnane Cherif
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 90-96, May 2012.
90-96 Online
10. Trajectory Estimation and Control of Vehicle using Neuro-Fuzzy Technique
Boumediene Selma and Samira Chouraqui
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 97-107, May 2012.
97-107 Online
11. Bifurcation Buckling of Pressurized Conical Vessels
Mohammad Zehsaz, Farid Vakili Tahami and Yasser Ashraf Gandomi
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 108-116, May 2012.
108-116 Online
12. Skill Free Tele-operation of Terrain Hugging UAV using an Advance Technique of Supervisory Command Optimization
Muhammad Ishfaq Javed, Salman Afghani, Sabien Irshad Ali, Muhammad Farhan Baluch
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 117-128, May 2012.
117-128 Online
13. Integration of Voice and Data in ATM Ring Network
Ehab A. Khalil
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 129-139, May 2012.
129-139 Online
14. Critical Success Factor in E-Learning: An examination of Technology and Student Factors
Mahdi Alhaji Musa and Mohd Shahizan Othman
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 140-148, May 2012.
140-148 Online
15. Analysis of the Class Dependency Model for Object-oriented Faults
Pranshu Gupta and David A. Gustafson
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 149-159, May 2012.
149-159 Online
16. A Study of Adaptive Feed Forward and Feedback Control Methods for Sliding Mode Controlled DC-DC Buck Converters
G. S. Rajanna and H. N. Nagaraj
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 137-144, May 2012.
160-167 Online
17. Surface Roughness Prediction with Denoising using Wavelet Filter
Syed Jahangir Badashah and P. Subbaiah
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 168-177, May 2012.
168-177 Online
18. Disaster Information in Optimal Route Selection
Karthikeyan .V
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 178-184, May 2012.
178-184 Online
19. Designing of a Smart Car using ARM7
Narasimhulu. M, Naresh Kumar Reddy. B, Subrahmanya Sharma .G
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 185-191, May 2012.
185-191 Online
20. Modeling and Control of Hybrid Photovoltaic-Wind Energy Conversion System
Yerra Sreenivasa Rao, A. Jaya Laxmi and Mostafa Kazeminehad
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 192-201, May 2012.
192-201 Online
21. Design of Hybrid Adder using QCA with Implementation of Wallace Tree Multiplier
Vijayalakshmi.P and Kirthika .N
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 202-214, May 2012.
202-214 Online
22. Hidden Semi-Markov Model for Detecting Application layer DDoS Attacks
Vidya Jadhav and Prakash Devale
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 215-223, May 2012.
215-223 Online
23. Wavelet based Video Compression using STW, 3D-SPIHT & ASWDR Techniques: A Comparative Study
Abhishek Jain and Anjali Potnis
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 224-234, May 2012.
224-234 Online
24. Comparative Thermal Analysis of Helixchanger with Segmental Heat Exchanger using Bell-Delaware Method
S. S. Shinde, P. V. Hadgekar, S. Pavithran
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 235-242, May 2012.
235-242 Online
25. Electric Field Stress Analysis for a Composite Cone Type Spacer Designed for Uniform Electric Field Distribution on Spacer Surface in the Presence of a Wire Like Particle
D. Deepak Chowdary, J. Amarnath
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 243-252, May 2012.
243-252 Online
26. Position Analysis based Approach for Trajectory Tracking Control of SCORBOT-ER-V Plus Robot Manipulator
Himanshu Chaudhary, Rajendra Prasad and N. Sukavanum
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 253-264, May 2012.
253-264 Online
27. FPGA Implementations of Advanced Encryption Standard: A Survey
Shylashree .N, Nagarjun Bhat and V. Shridhar
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 265-285, May 2012.
265-285 Online
28. Face Detection from Pose Varying Facial Images
Saroj Dhoundiyal, Shilpa Themdeo, Niraj Waghmare, Kailash Dodani and K. R. Singh
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 286-292, May 2012.
286-292 Online
29. Power Estimation Analysis for CMOS Cell Structures
Kanika Kaur and Arti Noor
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 293-301, May 2012.
293-301 Online
30. Fault Tolerance in FPGA through King Shifting
R. V. Kshirsagar and S. Sharma
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 302-308, May 2012.
302-308 Online
31. Recent Trends in Machine Learning for Background Modeling and Detecting Moving Objects
Shobha. G & N. Satish Kumar
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 309-313, May 2012.
309-313 Online
32. Efficiency Enhancement of Routing Protocol in Manet
Jaya Jacob, V. Seethalakshmi
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 314-323, May 2012.
314-323 Online
33. An Effective Performance of Combinational and Sequential Logic Cells using Current Source Modeling
Renuga and Sridevi
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 324-332, May 2012.
324-332 Online
34. Performance Analysis of Round Robin Scheduling using Adaptive Approach Based on Smart Time Slice and Comparison with SRR
Vishnu Kumar Dhakad, Lokesh Sharma
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 333-339, May 2012.
333-339 Online
35. Reinforced Stone Column: Remedial of Ordinary Stone Column
Tandel Y.K., Solanki C. H. and Desai A. K
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 340-348, May 2012.
340-348 Online
36. Discovery of Probable Dimensions & Facts from Raw Data Available in the File Systems and Oracle(R) Relational Database Schemas for a Multi-Dimensional Data-Warehousing Application
Goparaju V. Ramesh, Mogalla Shashi and KVSS Rajeswara Rao
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 349-359, May 2012.
349-359 Online
37. Ensuring Scalable, Secured, Maintenance and Access Control of College Data, using Cloud Computing
Yogeesh A.C, Dilip B.R, Chandra, Divya S Abhyankar
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 360-370, May 2012.
360-370 Online
38. Steady-State Modeling and Analysis of Three Phase Self-excited Induction Generator with Series Compensation
S. Singaravelu and S. Sasikumar
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 371-380, May 2012.
371-380 Online
39. Programming for Fixing Priority to the Identified Road Improvement Projects in Salem City
T. Subramani, C. Kathirvel, P. K. Kumaresan
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 381-390, May 2012.
381-390 Online
40. Developing a Testing Tool for Testing Both GUI and Web Applications Together
Shashank Joshi, Shital Pawar
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 391-394, May 2012.
391-394 Online
41. An Application to Human Face Photo-Sketch Synthesis and Recognition
Amit R. Sharma and 2Prakash. R. Devale
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 395-402, May 2012.
395-402 Online
42. Investigation of Erosive Wear on Al2O3 Coated Cast Iron using Response Surface Technique
Sunil Kumar and Jasbir Singh Ratol
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 403-410, May 2012.
403-410 Online
43. Design and Simulation of Multilevel Based DSTATCOM
P. Surendra Babu and B.V. Sanker Ram
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 411-421, May 2012.
411-421 Online
44. Load Balancing with Partial Knowledge of System in Peer to Peer Networks
R. Vijayalakshmi and S. Muthu Kumarasamy
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 422-428, May 2012.
422-428 Online
45. Optimized Implementation of FFT Processor for OFDM Systems
Pradeepa. M, Gowtham. P
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 429-441, May 2012.
429-441 Online
46. Multi-Font/Size Character Recognition
D. A. Jadhav and G. K. Veeresh
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 442-445, May 2012.
442-445 Online
47. Improved Bilateral Contract Approach to Multi-Area Unit Commitment in Deregulated Electricity Market
K.Venkatean and C. Christober Asir Rajan
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 446-455, May 2012.
446-455 Online
48. Effect of Coarse Aggregate Blending on Fresh Properties of Self Compacting Concrete
J. Guru Jawahar, M.M. Premchand, C. Sashidhar, I.V. Ramana Reddy and J. Annie Peter
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 436-450, May 2012.
456-466 Online
49. Design of Multiplexer using Tolerant Keeper Technique
R. Vetri Selvi, and S. Prabu Venkateshwaran
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 467-478, May 2012.
467-478 Online
50. An Experimental Work to Study Metallography of the Brazed Joints between the Pure Al2O3 and Ti (1-2% alloying elements) in Presence of Silver Eutectic Brazing Alloy BVAg-8
Susheel Pandey
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 479-484, May 2012.
479-484 Online
51. Performance and Evaluation of New Multi Level Inverter Topology
K. Surya Suresh and M. Vishnu Prasad
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 485-494, May 2012.
485-494 Online
52. Control of Multi Input DC/DC Converter using Battery and Ultra Capacitor
Hina Naaz, B. T. Deshmukh
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 495-498, May 2012.
495-498 Online
53. Power Flow Model of Static Var Compensator and Enhancement of Voltage Stability
H.B. Nagesh and P. S. Puttaswamy
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 499-507, May 2012.
499-507 Online
54. Stabilization And Robustification of Negative Output Superlift Luo Converter using Sliding Mode Control Approach
V. Chamundeeswari, R. Seyezhai, A. Arul Robin
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 508-519, May 2012.
508-519 Online
55. Simulation and Analysis Studies to Explore the Parameters that Affect the Performance of the FDDI at Gigabit Speed
Ehab A. Khalil
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 520-527, May 2012.
520-527 Online
56. Two-Tier Architecture for Domain Specific Document Summarization using Probabilistic Latent Semantic Analysis
Madhuri Singh, Farhat Ullah Khan
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 528-534, May 2012.
528-534 Online
57. A Review on Monitoring of Atmospheric Parameters from Microwave Radiometer Data using LabVIEW(TM)
Pallavi Asthana, J. S. Pillai and M. S. Panse
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 535-541, May 2012.
535-541 Online
58. Energy Efficient Target Tracking in Wireless Sensor Network
Mayur Patel, Apurva Shah
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 542-549, May 2012.
542-549 Online
59. A Simple Tool for Self Compacting Concrete Mix Design
J. Guru Jawahar, C. Sashidhar, I.V. Ramana Reddy and J. Annie Peter
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 550-558, May 2012.
550-558 Online
60. Closed Loop Speed Control of SEDC Motor using Three Phase Fully Controlled Bridge Rectifier with Inner Current Loop
Raju Singh, A. K. Pandey
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 559-567, May 2012.
559-567 Online
61. Natural Language Query Processing Using Probabilistic Context Free Grammar
Arati K. Deshpande and Prakash. R. Devale
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 568-573, May 2012.
568-573 Online
62. Face Recognition using Maximum Confidence Hidden Markov Model
Swati Raut & S. H. Patil
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 574-581, May 2012.
574-581 Online
63. Study of Cycle Slips and Signal to Noise Ratio in Dual Frequency GPS Receiver
P. Karthik, N. Anand Ratnesh, V. Nagireddy, K. Nagamallik, S. Gopi Krishna, P.S. Brahmanadam, B. Sada Siva Rao and D. Venkata Ratnam
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 582-590, May 2012.
582-590 Online
64. Optimum Thickness of Three-Layer Shrink Fitted Compound Cylinder for Uniform Stress Distribution
Ayub A. Miraje and Sunil A. Patil
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 591-605, May 2012.
591-605 Online
65. Computing Network Reliability with Imperfect Nodes Using Modified Binary Decision Diagram
Manoj Singhal, R. K. Chauhan, Girish Sharma
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 606-614, May 2012.
606-614 Online
66. Feature Extraction using Sectorization of Full Kekre Transform for CBIR
H. B. Kekre and Dhirendra Mishra
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 615-625, May 2012.
615-625 Online
67. Recent Development of Solar Photovoltaic Technologies in India
S. M. Ali, Arjyadhara Pradhan, Sthita Prajna Mishra
Removed due to Copyright Infringement
xxxxx Removed
68. Role of Facts Devices on Zonal Congestion Management Ensuring Voltage Stability under Contingency
J. Sridevi, J. Amarnath and G. Govinda Rao
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 635-641, May 2012.
635-641 Online
69. Load Compensation of a Diesel Generator Set for an Obscure System using DSTATCOM
G.V.N. Ajay Kumar, Jarupula Somlal
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 642-649, May 2012.
642-649 Online
70. A Review of Various Score Normalization Techniques for Speaker Identification System
Piyush Lotia, M. R. Khan
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 650-667, May 2012.
650-667 Online
71. Fuzzy Logic Based Controller for a Stand-Alone Hybrid Generation System Using Wind and Photovoltaic Energy
G. Balasubramanian and S. Singaravelu
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 668-679, May 2012.
668-679 Online
72. Partial Reconfiguration for Signal Processing Application using FPGA
S. S. Shriramwar and Kartik Ingole
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 680-684, May 2012.
680-684 Online
73. Design and Implementation of Multiple Fault Diagnosis on VLSI Circuits Using Artificial Neural Networks
Karthikeyan. A, Rajeswaran. N
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 685-695, May 2012.
685-695 Online
74. An Insight to Call Blocking Probabilities of Channel Assignment Schemes
M.L.S.N.S. Lakshmi, M.S.L. Ratnavathi and S. Gopi Krishna
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 696-710, May 2012.
696-710 Online
75. Prioritization of Optimized Test Cases: An Approach
Swati Chandna, Abhishek Singhal, Abhay Bansal
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 711-720, May 2012.
711-720 Online
76. Evaluation for the Effects of Silica on Mechanical Properties of TERNE
Amit Kumar Parya, Jitendra Verma, Prabhu Lal Verma, Pankaj Agrawal, Lokesh Bajpai
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 721-729, May 2012.
721-729 Online
77. Design, Simulation and Modelling Micromachined Grating Filter
Sanjeev Kumar and Prem Ranjan Kumar
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 730-738, May 2012.
730-738 Online
78. Brain Computer Interface and its Types - A Study
Anupama .H .S, N. K. Cauvery, Lingaraju. G. M
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 739-745, May 2012.
739-745 Online
79. Process Failure Mode and Effect Analysis on Tig Welding Process - A Criticality Study
Aravinth .P, Subramanian .S.P, Sri Vishnu .G, Vignesh .P
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 746-755, May 2012.
746-755 Online
80. Laminar Flow Analysis over a Flat Plate by Computational Fluid Dynamics
Rajesh Khatri, Pankaj Agrawal, Mohan Gupta, Jitendra Verma
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 756-764, May 2012.
756-764 Online
81. Analysis of Various Flaws Detection using Segmentation Techniques in Weld Images
Sangita Dubey, Kamal Shah
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 765-774, May 2012.
765-774 Online
82. Computation of Electric Field for FGM Spacer Using Tri-Post Insulator in GIS
Gopichand Naik. M, Amarnath. J, Kamakshiah. S
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 775-786, May 2012.
775-786 Online
83. A Multicast Routing Scheme for finding Two Node Disjoint Paths in a Network
Rohit Kumar
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 787-794, May 2012.
787-794 Online
84. An Efficient Approach of Peak to Average Power Ratio Reduction in OFDM using CAP-PT Method
C. Raja Rajeshwari, M. Rajkumari
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 795-802, May 2012.
795-802 Online
85. Hip using Mirror Imaged Characters and Fingerprint Authentication for On-Line Election
N. Krishna Chaitanya and V. Gouthami
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 803-808, May 2012.
803-808 Online
86. Survey of Multipath QoS Routing Protocols for Mobile Ad hoc Networks
Mandeep Kaur Gulati and Krishan Kumar
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 809-819, May 2012.
809-819 Online
87. Design and Development of Linear Magnetic Generator
Manoj Gattani
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 820-825, May 2012.
820-825 Online

Full Volume 3 Issue 2 Download
International Journal of Advances in Engineering & Technology (IJAET), Volume 3 Issue 2, pp. 1-825, May 2012.
1-825 Online